1、配置高速同步串行接口

Router (config) # interface s1/1

Router (config-if) # description To-shenzhen

Router (config-if) # bandwidth 2048

Router (config-if) # ip address 212.112.41.81 255.255.255.252

Router (config-if) # encapsulation hdlc

Router (config-if) # no ip directed-broadcast

Router (config-if) # no ip proxy-arp

22、配置POS接口

Router (config) # interface POS3/0

Router (config-if) # description To TianJingDaXue

Router (config-if) # bandwidth 2500,000

Router (config-if) # ip address 212.12.37.18 255.255.255.252

Router (config-if) # crc 32

Router (config-if) # pos framing sdh

Router (config-if) # no ip directed-broadcast

Router (config-if) # pos flag s1 s0 2

3、loopback 接口的`配置

Router (config) # int loopback 0

Router (config-if) # ip address 192.167.167.6 255.255.255.255

Router (config-if) # no ip route-cache

Router (config-if) # no ip mroute-cache

4、配置靜態路由

Router (config) # ip route 195.65.96.0 255.255.240.0 222.112.37.1(靜態路由的配置)

25、進入RIP配置模式

Router (config) # router rip

6、設置參與RIP協議的網絡地址

Router (config-router) # network 159.105.0.0

7、配置RIP的被動接口

Router (config-router) # passive-interface ethernet 0

8、配置RIP的路由過濾

Router (config) # access-list 12 deny any

Router (config) # router rip

Router (config-router) # distribute-list 12 in ethernet0

9、配置RIP的管理距離

Router (config-router) # distance 50

10、配置RIP的鄰居路由器

Router (config-router) # neighbor 202.112.7.2